The stock position size calculator above turns your account-risk budget and entry-to-stop distance into a whole-share quantity, subject to a position cap. Choose the entry and stop from your own plan, then compare the calculated share count, position value, and planned loss. Actual losses can exceed that estimate because of gaps, slippage, or costs; the tool sizes long stock positions and does not execute orders.
The formula behind the share count
The calculator runs three steps:
- Dollar risk = account size × risk per trade. $25,000 at 1% is $250.
- Shares by risk = dollar risk ÷ (entry price − stop price), rounded down to a whole share.
- Shares by cap = (account size × maximum position %) ÷ entry price, rounded down.
It shows the smaller of the two share counts, then reports position value (shares × entry), loss at stop (shares × the dollar gap to the stop), and stop distance as a percent of entry. When the cap is what limits the trade, a note tells you how many shares risk alone would have allowed.
Worked example: $25,000 account at 1% risk
Suppose a fictional stock is Ready and tightening below a $48.00 pivot. You have checked the daily chart and want to plan the share count before the next session.
After checking the chart, the hypothetical plan uses a $48.20 entry above the pivot and a $45.90 stop below the final tight range. These are chosen chart levels, not prices supplied by the score. Enter them in the calculator above with a $25,000 account, 1% risk, and a 25% position cap to follow along.
- Dollar risk: $25,000 × 1% = $250
- Stop distance: $48.20 − $45.90 = $2.30 a share, or 4.8% of entry
- Shares by risk: $250 ÷ $2.30 = 108.7, rounded down to 108 shares
- Shares by a 25% cap: $6,250 ÷ $48.20 = 129 shares, so the cap does not bind
- Position value: 108 × $48.20 = $5,205.60, about 20.8% of the account
- Loss at stop: 108 × $2.30 = $248.40
The risk budget is $250, and the planned loss if 108 shares fill at the stop is $248.40. An overnight gap can produce a larger loss.
Rounding down is why the loss at stop is slightly under $250. To see how stop distance affects sizing, change the example stop to $47.40, only $0.80 away. Risk alone would allow 312 shares, a $15,038.40 position worth 60% of the account. The 25% cap cuts that to 129 shares ($6,217.80), and the loss at stop falls to $103.20. With a $41.00 stop instead, the same $250 allows only 34 shares. These variations illustrate the formula; choose the actual invalidation level from the chart before calculating shares.
How to read the result
- Shares is the order size. Buy that many or fewer, never more.
- Position value is the cash the trade ties up. If several open trades would exceed your buying power, reduce the number of trades, not the stop distance.
- Loss at stop is the planned loss if the stop fills at its price. It is not the worst case.
- Stop distance is a sanity check. A distance far wider than the stock’s recent average daily range often means the entry is late. One narrower than a typical day’s range means ordinary noise can stop you out.
If the note says the position was capped, you are risking less than your budget. That is fine; do not widen the stop to use the full amount.
Common position sizing mistakes
- Moving the stop to fit the share count. Choose the stop from the chart first. A stop placed to afford more shares is not a stop.
- Sizing by dollar amount. Buying $5,000 of every stock means a stock with a 3% stop risks $150 and one with a 12% stop risks $600.
- Changing risk after a win or a loss. Keep the risk percent fixed and let the share count vary.
- Ignoring gaps. If the stock in the example opens at $44.10, below the $45.90 stop, the 108-share position loses $442.80, about 1.8 times the plan. A stop order is not a guaranteed price.
- Forgetting open risk. Five open trades at 1% each put about 5% of the account at risk if they all fail together, which is more likely when the whole market turns.
Where sizing fits in an end-of-day workflow
TraderSight uses completed daily bars and updates after the US close on weekdays. A typical evening sequence is: review candidates in the VCP stock screener, check the chart, mark the pivot and stop, then size the trade here before the next session. The how it works page explains the scoring, and the after-close swing trading routine covers the review itself. If you only look at charts at the weekend, the weekly review routine shows how to plan orders in advance.
To choose the risk percent, test it against a bad run with the drawdown recovery calculator, and check whether your trades earn enough per unit of risk with the trading expectancy calculator. The position sizing lesson explains the reasoning in full, and the swing setup course puts it in context. Use Copy summary or Download summary to keep a record of each planned trade.
Scope: educational only. The calculator assumes a long trade, whole shares, and a fill at the stop price. It ignores commissions, slippage, gaps, margin, risk from other open positions, and currency conversion. It does not tell you which stock to trade or what risk percent to use. Not investment advice.